Electrical & Contractor Testing Solutions

Electrical Testing Solutions
AVO300 digital Multimeter - Tough compact instruments designed for the contracting electrician, but are also suitable for a wide range of applications and users.
AVO300 digital Multimeter
Megger Bite series Battery Testers
Megger Bite series Battery Testers The BITE™ family of products provides meaningful data on battery health without significant expense or reduction in remaining battery capacity. The BITE products are designed for on-line ac impedance and dc terminal voltage measurement of secondary batteries.
Fluke T100 Series/ T50 Voltage and Continuity Testers - Offers a low cost solution to voltage - continuity measurement. Contains an acoustic and optic continuity test and features a single pole test for phase detection.
Fluke T100 Series/ T50 Voltage and Continuity Testers - Offers a low cost solution to voltage - continuity measurement. Contains an acoustic and optic continuity test and features a single pole test for phase detection.	-
-	Fluke 9040/9062 Phase Rotation Indicators - Measurement of Phase rotation in all areas where three phase supplies are used to feed motors, drives and electrical systems. Rotary field and motor rotation indications are possible with the benefits of contact-less detection.
Fluke 187 – The Smartest meters for complex industrial and design problems: - The 180 series are the only choice for users who simply want the best meter available. They are the smartest meters when it comes down to performance, features and more.	-
-	The new Fluke 87V has improved measurement functions, trouble-shooting features, resolution and accuracy to solve more problems on motor drives, in plant automation, power distribution and electro-mechanical equipment.
Fluke 196C ScopeMeter – Speed, performance and analysis power: - For more demanding applications, the ScopeMeter 190 series high performance oscilloscopes offer specifications usually found on top-end bench instruments.	-
Fluke 9040/9062 Phase Rotation Indicators
Fluke 9040/9062 Phase Rotation Indicators - Measurement of Phase rotation in all areas where three phase supplies are used to feed motors, drives and electrical systems. Rotary field and motor rotation indications are possible with the benefits of contact-less detection.
Fluke 280 Series True-rms Logging Multimeter with TrendCapture: - The new Fluke 287/289 true-RMS digital multimeters were designed for those of you at the top of your field. The instruments replace our popular 180 Series, with all the same features, plus more.
Fluke 187
Fluke 87V
The new Fluke 87V has improved measurement functions, trouble-shooting features, resolution and accuracy to solve more problems on motor drives, in plant automation, power distribution and electro-mechanical equipment.
Fluke 196C ScopeMeter – Speed, performance and analysis power: - For more demanding applications, the ScopeMeter 190 series high performance oscilloscopes offer specifications usually found on top-end bench instruments.
Fluke 196C ScopeMeter

Electrical Measurement Solutions

ULYS Electronic Energy Meters State of the art energy meters with complete IEC61036 compliance, complete range of 6 self-powered meters (Single & Three Phase), measures instantaneous & maximum power, zero re-settable meter for periodic energy management.
ULYS Electronic Energy Meters
TRIAD Programmable Measuring Transducers
TRIAD Programmable Measuring Transducers Class 0.2 Multifunction Configurable Transducers that convert all high voltage electrical variables (P, Q, S, U, I, F & Cos O) on 1, 2 or 3 low level analog outputs (mA or V), insulated to 4kV, Wide dynamic range power supply.
RECDIGIT NODUS Power Monitors Compact power monitors that possess all the necessary functions for supervising low voltage network applications. Simplicity of use, design & high level performance ensures perfect integration into LV cabinets & Panel switchboards.
RECDIGIT NODUS Power Monitors
Current Transformers & Industrial Shunts Wide choices of low voltage current transformers that are available in various sizes & shape to meet your specific requirements.
Other Electrical testing solutions Megger also offers a whole range of solutions in Electrical testing like AC/DC Dielectric testing, low resistance ohmmeters tests, oil test eqpt., relay test sets, etc.

Clampmeters

Fluke 330 series Current Clamp Meter- The Fluke 330 series Clamp Meters offer all the features you need to fit the way you work. The small body and jaws fit perfectly in your hand and into tight places.
Fluke 330 series Current Clamp Meter
Megger MMC850 Multi-core AC digital clamp meter - unique solution to current measurement in multi-core cables, without the need to split cores. Can be used instead of traditional clamp meters, when commissioning, or for general maintenance work in electrical machinery and installations
MMC850 Multi-core AC digital clamp meter

Contractor Testing Solutions

MIT200 Series Digital/Analog Insulation & Continuity Testers
MIT200 Series Digital/Analog Insulation & Continuity Testers - Smallest insulation testers available on the market today with options of a two voltage tester to a three voltage instrument
MIT510 and MIT1020 5 kV & 10 kV Insulation Resistance Tester - Designed specifically to assist you with the testing and maintenance of high voltage electrical equipment. IEEE 43-2000 recommends the use of 10 kV for motor windings rated 12 kV and the Megger MIT1020 facilitates this.
MIT510 and MIT1020
Fluke 1577/1587 Insulation Multimeters
Fluke 1577/1587 Insulation Multimeters - Combines a digital insulation tester with a full-featured True RMS digital multimeter in a single compact, handheld unit, providing maximum versatility for both troubleshooting and preventive maintenance.
Fluke 1503/1507 Insulation testers - When you need a low cost solution to general purpose insulation testing look no further than the new Fluke installation tester range. They are compact, rugged, reliable and easy to use.
Fluke 1503/1507 Insulation testers
Megger BMM2000
Megger MIT400 series Industrial maintenance insulation and continuity testers
Fluke 1550B 5KV Insulation tester
Fluke 1550B 5KV Insulation tester The Fluke 1550B is a digital insulation tester capable of testing switchgear, motors, generators and cables at up to 5000 V DC. It can be used for a wide range of tests: from simple spot checks to timed tests and breakdown tests.
Fluke 1650B series Installation testers The 1650B Series testers verify the safety of electrical installations in domestic, commercial and industrial applications. They can ensure that fixed wiring is safe and correctly installed to meet the requirements of IEC 60364, HD 384 and all relevant local standards.
Fluke 1650 series Installation testers
Megger MFT1500 Multifunction Tester
Megger MFT1500 Multifunction Tester The MFT1500 series combines all the essential features necessary for testing domestic, commercial and industrial fixed wiring in accordance with International Standards and National Wiring Regulations including BS7671 and European Standard EN61557.

Cable Testing Solutions

Fluke 2042 Cable Locator
Fluke 2042 Cable Locator - Multipurpose solution to Cable location. Ideal for tracing cables in walls and underground, locating fuses/breakers on final circuits and locating interruptions and short circuits in cables and electrical floor heating systems.
Megger BTDR1500 Hand-held Time Domain Reflectometer The Megger BTDR1500 is an advanced instrument capable of identifying nearly all types of cable fault using both Time Domain Reflectometry and Automatic Resistance Bridge Techniques.
Megger BTDR1500 Hand-held Time Domain Reflectometer

Transformer Testing Solutions

Transformer Test Equipment
Transformer Test Equipment - Automatic hand-held battery operated Transformer turns ratio test set used to measure turns ratio, excitation current and polarity of windings in single and 3 phase distribution and power transformers, potential & current transformers, and tapped transformers.

Low Resistance Testing Solutions

DLRO 10X Digital Low Resistance Ohmmeter
DLRO 10X Digital Low Resistance Ohmmeter The Megger DUCTER DLRO 10X bring new standards to low resistance measurements. It is fully automatic, selecting the most suitable test current, up to 10 A dc to measure resistance from 0.1 microohms to 2000 ohms on one of seven ranges.
DLRO 600 High Current Megger DLRO 600 measures resistances between 0.1 microohms and 1 microohms, at high currents. This instrument can provide test currents from 10 amps up to 600 amps subject to the load resistance and supply voltage.
DLRO 600 High Current

Ground Resistance Testing Solutions

DET10C and 20 C Earth resistance Clamp Meters - Suitable for measuring earth resistance in various installations such as buildings, pylons and RF transmitter sites, also for inspection and verification of lightning protection systems.
DET10C and 20 C Earth resistance Clamp Meters
DET3T and DET4T series Ground testers
DET3T and DET4T series Ground testers - Replaces the existing DET62D Earth testers with a new family of Two and Three Pole ground testers with digital or analogue display and Two, Three and Four Pole Tester with Digital Display.
DET5/4R Rechargeable Digital Earth Tester The Megger DET5/4R is a fully automatic, four terminal instrument built into a rugged, water-resistant case giving protection for outdoor use.
DET5/4R Rechargeable Digital Earth Tester
LRCD200 Series Combined Loop and RCD Testers
LRCD200 Series Combined Loop and RCD Testers - Latest generation of combined non-tripping loop tester and RCD test instruments that provide simple, affordable and flexible test tools for electrical contractors testing energized circuits.


All Images & Text on this page are "Copyright (c) 2000-6, Haris Al Afaq, Dubai, United Arab Emirates, Arabian Gulf, All Rights Reserved"

Covering the Gulf Cooperation Council (GCC: UAE, Qatar, Bahrain, Oman, Kuwait, Saudi Arabia) and Yemen